Sending Faxes with Multiple Settings

6 - 2      S E T U P   S E N D
Sending Faxes with Multiple Settings
When you send a fax you can choose any 
combination of these settings:  add a coverpage 
and select a comment; set the contrast or 
resolution; send using overseas mode, or 
delayed fax timer, polling transmission or real 
time transmission. After each menu selection is accepted, the LCD will ask if 
you want to enter other settings:
Press 1 if you want to select additional settings. The LCD returns to the 
Press 2 if you are finished choosing settings, and then go to the next step.
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones 
while sending a fax.
Place the original face down in the ADF.
Pick up the handset and listen for a dial tone—OR—
Press Hook and listen for a dial tone.
Dial the fax number you want to call (you can enter the digits using the dial pad, 
or you can enter a One Touch or Speed Dial number or you can call from the 
(See One Touch Dialing, Page 7-5.)
When you hear the fax tone, press Fax Start.
If you’re using the handset, hang up.
Automatic Transmission
This is the easiest way to send a fax. IMPORTANT: Do not pick up the 
handset, or press Hook to listen for a dial tone.
Place the original face down in the ADF.
Enter the fax number using One Touch, Speed Dial, Search or the dial pad. (See 
Speed Dialing
, Page 7-5.)
Press Fax Start.
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, after you disconnect the 
call press Redial/Pause to retry the number.
If you’re sending a fax automatically and the line is busy, the machine will redial 
automatically redial (up to three times at 5 minute intervals).
1.YES 2.NO