Creating your own startup screen, Adjusting the sound

38 
Operation  
Eng
l
ish
Creating your own startup screen
In addition to selecting the projector preset startup screen from among BenQ logo, Black or Blue screen, you can 
make your own startup screen that is a picture projected from your computer or video source.
To create your own startup screen, project the picture you want to use as your startup screen from either a 
computer or video source. The rest steps are as follows.
Using the remote control
1.
Press CAPTURE. 
2.
A confirmation message displays. Press CAPTURE or ENTER again.
3.
The message 'Screen Capturing...' displays while the projector is processing the 
picture. Please wait.
4.
If the action is successful, you see the message 'Captured Succeeded' on the screen. 
The captured picture is saved as My Screen.
5.
To view the captured picture displayed as the startup screen, set My Screen in the 
SYSTEM SETUP: Basic > Splash Screen menu and restart the projector.
Using  the  OSD  menu
1.
Press MENU/EXIT and then press  /  until the SYSTEM SETUP: Basic menu is 
highlighted.
2.
Press   to highlight My Screen and press ENTER.
3.
Repeat steps 2-5 in the 
"Using the remote control"
 section to capture and view the 
captured picture.
In the unlikely event that the capturing action fails, change your target picture.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speakers. Be sure you have made a 
correct connection to the projector audio input. See 
"Connection" on page 16
 for how the audio input is 
connected.
Muting the sound
To temporarily turn off the sound,
Using the remote control
Press MUTE to temporarily turn off the sound. While the sound is off, the screen will 
display 
 in the upper right corner of the screen.
To restore the sound, press MUTE again.
Using  the  OSD  menu
1.
Press MENU/EXIT and then press  /  until the SYSTEM SETUP: Advanced 
menu is highlighted.
2.
Press   to highlight Audio Settings and press ENTER. The Audio Settings page 
displays.
3.
Highlight Mute and press  /  to select On.
4.
To restore the sound, repeat steps 1-3 and press  /  to select Off.
Adjusting the sound level
To adjust the sound level,
1.
Repeat steps 1-2 above.
2.
Press   to highlight Volume and press  /  to select a desired sound level.
Turning off the Power on/off ring tone
To turn off the ring tone,
1.
Repeat steps 1-2 above.
2.
Press   to highlight Power on/off ring tone and press  /  to select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute or 
changing the sound level will not affect the Power on/off ring tone.