How to determine the recommended screen size for a, given distance

Positioning your projector
16
For example, if you are using an 120-inch screen, the recommended projection distance is 
4246 mm and the vertical offset is 137 mm.
How to determine the recommended screen size for a 
How to determine the recommended screen size for a 
How to determine the recommended screen size for a 
How to determine the recommended screen size for a 
given distance
given distance
given distance
given distance
This method can be used for situations where you have purchased this projector and would 
like to know what screen size will fit in your room.
The maximum screen size is limited by the physical space available in your room. 
1.
Measure the distance between the projector and where you want to position the 
screen. This is the projection distance.
2.
Refer to the table on page 
17
 and find the closest match to your measurement in the 
average distance from screen column labelled 
"Distance from screen (mm)"
. This is the 
projection distance.
3.
Using this value, look across that row to the left to find the corresponding 
"Screen size"
 
listed in that row. That is the projected image size of the projector at that projection 
distance.
4.
On that same row, look across to the right column and make note of the 
"Vertical 
offset (mm)"
 value. This will determine the final placement of the screen in relation to 
the horizontal plane of the projector.
For example, if your measured projection distance is 4.5 m (4500 mm), the closest match in 
the 
"Distance from screen (mm)"
 column is 4246 mm. Looking across this row shows that a 
120'' (about 3.0 m) screen is required.
If you place the projector in a different position (to that recommended), you will have to tilt 
it down or up to center the image on the screen. In these situations, some image distortion 
will occur. Use the Keystone function to correct the distortion. See 
"Correcting keystone" on 
page 28
 for details.