Fine tuning the image quality in user modes

Operation
39
3.
Press 
Left/
Right to select User 1 Mode to User 2 Mode.
4.
Press 
Down to highlight Reference.
5.
Press 
Left/
Right to select an application mode that is closest to your need.
6.
Press 
Down to select a menu item to be changed and adjust the value with 
Left/
Right. See 
"Fine-tuning the image quality in user modes"
 below for details.
7.
When all settings have been done, highlight Save Settings and press ENTER to store 
the settings.
8.
The confirmation message 'Setting Saved' displays.
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available 
when User 1 or 2 mode is selected. You can make adjustments to these functions based on 
your needs.
Adjusting brightness
Adjust the values by pressing 
Left/
Right on the projector or remote control.
The higher the value, the brighter the image. And lower the setting, darker the image. Adjust 
this control so the black areas of the image appear just as black and that detail in the dark 
areas is visible.
Adjusting contrast
Adjust the values by pressing 
Left/ 
Right on the projector or remote control.
The higher the value, the greater the contrast. Use this to set the peak white level after you 
have previously adjusted the Brightness setting to suit your selected input and viewing 
environment. 
Selecting a color temperature
Adjust the values by pressing 
Left/ 
Right on the projector or remote control.
There are four color temperature* settings available.
1.
T1: With the highest color temperature, T1 makes the image appear the most bluish 
white than other settings.
2.
T2: Makes images appear bluish white.
3.
T3: Maintains normal colorings for white.
4.
T4: Makes images appear reddish white.
*About color temperatures:
There are many different shades that are considered to be "white" for various purposes. One 
of the common methods of representing white color is known as the “color temperature”. A 
50
-30
+70
-30
50
+70