4 3 3, Primary IDE Master Slave SATA1 4

ASUS V-series P5G41E
While entering Setup, the BIOS automatically detects the presence of IDE/SATA 
devices. There is a separate sub-menu for each IDE/SATA device. Select a device 
item then press <Enter> to display the IDE/SATA device information.
The BIOS automatically detects the values opposite the dimmed items (Device, 
Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and 
SMART monitoring). These values are not user-configurable. These items show 
N/A if no IDE/SATA device is installed in the system.
Selects the type of IDE drive. Setting to Auto allows automatic selection of the 
appropriate IDE device type. Select CDROM if you are specifically configuring a 
CD-ROM drive. Select ARMD (ATAPI Removable Media Device) if your device 
is either a ZIP, LS-120, or MO drive. Configuration options: [Not Installed] [Auto] 
Select the type
of device connected
to the system
     Advanced     Power     Boot     Tools    Exit
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to Auto enables the LBA mode if the 
device supports this mode, and if the device was not previously formatted with LBA 
mode disabled. Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When set to Auto, the data 
transfer from and to the device occurs multiple sectors at a time if the device 
supports multi-sector transfer feature. When set to [Disabled], the data transfer 
from and to the device occurs one sector at a time.  
Configuration options: [Disabled] [Auto]
This item appears only when you select the Primary.IDE.Master/Slave devices.
Primary IDE Master 
Device        : Not Detected 
LBA/Large Mode 
Block(Multi-Sector Transfer) M  [Auto]
PIO Mode 
DMA Mode 
SMART Monitoring 
32Bit Data Transfer 
      Select Screen
      Select Item
Enter Go to Sub-screen
F1    General Help
F10   Save and Exit
ESC   Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.