BIOS utility, Boot sequence, Enable disk to disk recovery, Password

72

English

BIOS utility

The BIOS utility is a hardware configuration program built into your 
computer's BIOS.

Your computer is already properly configured and optimized, and you do not 
need to run this utility. However, if you encounter configuration problems, you 
may need to run it.

To activate the BIOS utility, press <F2> during the POST; while the notebook PC 
logo is being displayed.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then select 
Boot from the categories listed at the top of the screen. 

Enable disk-to-disk recovery

To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility, 
then select Main from the categories listed at the top of the screen. Find D2D 
Recovery at the bottom of the screen and use the <F5> and <F6> keys to set this 
value to Enabled.

Password

To set a password on boot, activate the BIOS utility, then select Security from 
the categories listed at the top of the screen. Find Password on boot: and use 
the <F5> and <F6> keys to enable this feature.