Sharp CD-MPS660H Owner Manual
Bookmarks and Contents
Bookmarks and Contents
PDF Info
Sharp CD-MPS660H Owner Manual
- Brand:
- Sharp
- Category:
- CD Component Systems
- Model:
- CD-MPS660H
- Type:
- Owner Manual
- Language:
- English
- Document Format:
- PDF file
- Filesize:
- 3.7 Mb
- Total Pages:
- 53 pages
Contents
- P8 Contents ...
- P19 All The Programmed Contents. [refer To Clearing ...
- P25 And All The Programmed Contents Will Be ...
- P29 To Check ...
- P38 Text Data Is Received Or When The Text Contents ...
Install
Connect
- P8 System Connections . . . . . . . . . . . . . . ...
- P9 Does Not Work Properly ...
- P14 Speaker Connection (see Page 8) ...
- P15 Connect The Am Loop Aerial To The Am Loop ...
- P16 Checking All The Connections Have Been Made ...
- P17 Control After Checking All The Connections (see ...
- P26 Enter File Names On Your Pc ...
- P31 Failure Or The Ac Power Lead Disconnection. ...
- P44 However ...
- P46 Play The Connected Equipment. ...
- P47 ! Are The Speaker Wires Disconnected? ...
Power
- P7 Product Contains A Low Power Laser Device. To ...
- P9 Socket. Plug The Ac Power Lead Back In ...
- P12 2. Ac Power Lead . . . . . . . . . . . . . . ...
- P14 Ac Power Connection (see Page 9) ...
- P15 The Unit Or Near The Ac Power Lead May Cause ...
- P16 When The Power Is On ...
- P17 Button. Does The Power Turn On? Now ...
- P18 When The Power Is Turned On ...
- P19 Supply Is Restored After A Power Failure Or ...
- P20 Auto Power On Function ...
- P21 Mode And Then Turn The Power On Again. ...
- P30 Auto Power On Function ...
- P31 Failure Or The Ac Power Lead Disconnection. ...
- P32 Auto Power On Function ...
- P33 This Case ...
- P34 The On/stand-by Button To Turn The Power On. ...
- P35 The On/stand-by Button To Turn The Power On. ...
- P38 Button To Enter The Power Stand-by ...
- P42 The On/stand-by Button To Turn The Power On. ...
- P43 Button To Enter The Power Standby Mode. ...
- P44 Button To Enter The Power Stand-by ...
- P45 The Unit Will Enter The Power Stand-by Mode ...
- P46 Auto Power On Function ...
- P47 Set The Unit To The Power Standthe Unit Does ...
- P48 Is The Ac Power Lead Of The Unit ...
- P49 Button To Enter The Power Stand-by ...
- P50 Mode Is Cancelled In The Power Stand-by Mode. ...
- P51 Rated Input Power ...
Operate
- P38 Unit Does Not Operate Properly. ...
- P44 The Timer Will Operate At The Same Time Every ...
- P48 Not Operate. ...
- P49 Etc.) Or If It Is Operated Incorrectly ...
Troubleshooting
- P8 Troubleshooting Chart . . . . . . . . . . . . . . . . .
- P47 Troubleshooting Chart ...
- P48 Troubleshooting Chart (continued) ...
Safety
Specification
- P8 Specifications . . . . . . . . . . . . . . . . . . .
- P50 The Performance Specification Figures Indicated Are
Dimension
Contact
- P3 De Stekker Altijd Uit Het Stopcontact Alvorens ...
- P3-beam semiconductor laser ...
- P51 Non-contact ...