Sanyo AVL-408,AVL-278,AVL-328,AVP-428 Instruction Manual
Bookmarks and Contents
Bookmarks and Contents
PDF Info
Sanyo AVL-408,AVL-278,AVL-328,AVP-428 Instruction Manual
- Brand:
- Sanyo
- Category:
- LCD TV
- Model:
- AVL-408, AVL-278, AVL-328, AVP-428
- Type:
- Instruction Manual
- Language:
- English
- Document Format:
- PDF file
- Filesize:
- 1.7 Mb
- Total Pages:
- 44 pages
Contents
Setup
- P20 Setup ...
- P21 Setup ...
- P22 Setup ...
- P24 Setup ...
- P25 Setup ...
- P26 Setup ...
- P27 Setup ...
- P28 Setup ...
- P29 Setup ...
- P30 Setup ...
- P31 Setup ...
- P32 Setup ...
- P33 Setup ...
- P35 Setup ...
- P36 Setup ...
- P37 Setup ...
- P38 Setup ...
- P39 Setup ...
Install
- P4 Energy And ...
- P5 Sources---do Not Install Near Any Heat Sources ...
- P6 Wall Or Ceiling ...
- P7 When Installing An Outside Antenna System ...
- P8 < Do Not Install Or Place The Remote Control ...
- P9 For More Specific Instructions On Installing ...
- P43 To Make Any Modifications To Or To Install Any ...
Connect
- P2 Connect A Vcr For Recording ...
- P4 That The Cable Ground Shall Be Connected To ...
- P6 Unplug It From The Wall Outlet And Disconnect ...
- P7 Antenna-discharge Unit ...
- P8 2. Connecting The Male Plug To The Wall Outlet ...
- P9 Connect The Outdoor Antenna Cable Lead-in To ...
- P11 Connect To The Audio And Component Output ...
- P14 Connect The Audio/video Cables Between The ...
- P15 Connect The Audio/video Cables Between The ...
- P16 Connect The Audio Cable Between The Audio Input ...
- P17 Connect The Video Cable Between The Y ...
- P18 Connect An Audio Cable Between The Audio Output ...
- P19 Connect The Audio/video Cables Between The ...
- P21 If You Are Connected To An Antenna ...
- P40 Check The Antenna Connection. ...
- P43 Antenna ...
Power
- Pwait for 60 seconds. ...
- P2 Power Connection ...
- P5 The Power Cord From Being Walked On Or ...
- P6 A. When The Power Cord Or Plug Is Damaged. ...
- P7 Touching Such Power Lines Or Circuits ...
- P8 The Ac Cord From Power Outlet When Not Using ...
- P10 Menu ...
- P11 Ac Power ...
- P12 1. Power ...
- P14 Device ...
- P20 With The Power On ...
- P40 Unplug The Power Cord ...
- P41 Stand By Mode Power Consumption ...
- P42 1 Power Cord ...
- P43 Damage Caused By Lightning And Power Surges. ...
Operate
- P4 The User's Authority To Operate This Device. ...
- P5 And Understood Before The Product Is Operated. ...
- P6 When The Product Does Not Operate Properly As ...
- P8 Product Should Be Operated Only From The Type ...
Troubleshooting
Safety
- P2 Important Safety ...
- P5 Provided For Your Safety. If The Provided Plug ...
- P6 By The Manufacturer. This Is A Safety Feature. ...
- P7 By Our Dealer To Ensure Safety And Emc. When ...