Brother , Innov-is 700E, Innov-is 700EII Operation Manual

PDF Info

Brand:

Brother

Category:

Sewing Machines

Model:

, Innov-is 700E, Innov-is 700EII, Innov-is 750E, PE-700, PE-700II, PE-750D, PE-750D(USB), PE-770, PE-780D

Type:

Operation Manual

Language:

English

File Information:

PDF / 1.7 Mb / 88 pages

Brother ,Innov-is 700E,Innov-is 700EII Operation Manual

Close

Cover of BrotherSewing Machines ,Innov-is 700E,Innov-is 700EII Operation Manual

Contents

• P3 The Contents Of This Manual And Specifications ...
• P5 Contents ...

Install

• P3 Or Other Parts To Assure Correct Installation. ...
• P5 Installing The Bobbin ...
• P15 Installing The Bobbin ...
• P16 Refer To “winding/installing The Bobbin” ...
• P21 A Qualified Electrician To Install The Proper ...
• P25 Bobbin Installation ...
• P26 Winding/installing The Bobbin ...
• P27 Winding/installing The Bobbin 25 ...
• P29 Winding/installing The Bobbin 27 ...
• P30 Not Correctly Installed ...
• P31 Winding/installing The Bobbin 29 ...
• P43 A 75/11 Needle Is Already Installed When The ...
• P49 For Details ...
• P70 The Bobbin Case Installed In This Machine Can ...
• P73 Installed ...
• P76 The Spool Is Not Installed Correctly ...
• P77 Correctly Install The Bobbin Thread. ...
• P78 Installed. Correctly Install The Needle. ...
• P85 Bobbin Installation ...

Connect

• P10 Plug In The Connector For The Embroidery Unit. ...
• P17 Connector Could Be Damaged ...
• P20 Due To A Bad Connection Or A Disconnection ...
• P45 Inches). This Is Used To Embroider Connected Or ...
• P85 Embroidery Unit Connector Slot ...

Power

• P2 Unplug Your Machine If The Power Is Cut. ...
• P5 Power Supply Precautions ...
• P11 Use The Main Power Switch To Turn The Machine ...
• P15 Power Supply Precautions ...
• P18 Whatever Is Near The Carriage ...
• P20 ● Unplug The Power Cord If The Machine Is ...
• P21 Unplug The Power Supply Cord. When ...
• P23 Screen When The Power Is Turned On. ...
• P24 The Power Is Turned Off. ...
• P53 Power Has Been Turned Off In The ...
• P64 Power Back On In The Middle Of Your Work. ...
• P72 ● Unplug The Power Supply Cord Before ...
• P85 Power Supply Jack ...

Operate

• P2 • Do Not Operate Where Aerosol (spray) ...
• P10 Use These Buttons To Operate The Machine. ...
• P16 Machine Does Not Operate.) ...
• P17 Is Not Attached ...
• P20 The Machine Does Not Operate Correctly Due To A ...
• P21 Procedure To Correctly Operate The Machine. ...
• P26 Will Not Operate Correctly. Use Only The ...
• P30 Operate Correctly. Use Only The Included ...
• P37 Machine Is Being Operated. ...
• P52 (liquid Crystal Display) Is Operated Using The ...
• P57 Cause Your Machine To Operate Incorrectly. ...
• P73 Sensor ...
• P76 Not Operate. ...
• P78 Operate When ...

Troubleshooting

• P3 Is Required ...
• P6 Troubleshooting ...
• P71 Troubleshooting ...
• P76 Troubleshooting ...
• P77 Troubleshooting 75 ...
• P79 Troubleshooting 77 ...
• P81 Troubleshooting 79 ...
• P83 Troubleshooting 81 ...
• P86 Troubleshooting ...

Safety

• P2 Please Read These Safety Instructions Before ...
• P4 By A Person Responsible For Their Safety. ...
• P7 “important Safety Instructions” ...

Specification

• P3 Of This Manual And Specifications Of This Product Are
• P9 All Specifications Are Correct At The Time Of ...

Contact

• P4 Should Contact Your Authorized Dealer To Obtain ...
• P8 Contact Your Retailer. ...
• P9 Accessories Or Parts ...
• P21 The Plug. If It Still Does Not Fit ...
• P23 For Regular Servicing. (contact Your ...
• P73 (part Code ...
• P76 Replace The Needle Plate. Contact ...
• P77 Replace The Needle Plate. Contact ...
• P78 Contact Your Retailer Or The Nearest ...