Brother DZ2400, DZ2750 Operation Manual

PDF Info

Brand:

Brother

Category:

Sewing Machines

Model:

DZ2400, DZ2750

Type:

Operation Manual

Language:

English

File Information:

PDF / 9.2 Mb / 116 pages

Brother DZ2400,DZ2750 Operation Manual

Close

Cover of BrotherSewing Machines DZ2400,DZ2750 Operation Manual

Contents

• P5 The Contents Of This Manual And Specifications ...
• P6 Contents ...

Install

• P4 Or Other Parts To Assure Correct Installation. ...
• P11 The Presser Foot Is Installed Onto The Presser ...
• P13 ■ Installing The Spool Pin ...
• P16 Electrician To Install The Proper Outlet. Do ...
• P24 Install The Bobbin Wound With Thread. ...
• P35 Install The Twin Needle In The Same Way. ...
• P36 Install The Thread Spool And Thread The Upper ...
• P39 Installed ...
• P48 Sewing ...
• P94 Aligned Before Installing The Bobbin Case. ...
• P95 Then Install It Again (steps H And I). Sewing ...
• P96 Correctly Install The Lower Thread. ...
• P97 Correctly Install The Bobbin. ...
• P103 Aligned Before Installing The Bobbin Case. ...
• P104 The Needle Plate ...
• P107 The Needle Is Incorrectly Installed. ...
• P108 Correctly Install The Needle. ...
• P109 Correctly Install The Spool Or Spool ...
• P110 The Needle Is Incorrectly Installed. ...
• P111 Correctly Install The Bobbin Thread. ...

Connect

• P3 Rating Label. Do Not Connect It To A Dc Power ...
• P10 Socket Connector. ...
• P15 Due To A Bad Connection Or A Disconnection ...
• P16 ● When Connecting The Foot Controller ...
• P21 Using The Foot Controller ...
• P23 Using The Foot Controller ...
• P43 If The Foot Controller Is Not Connected ...
• P67 A Connecting Fork ...
• P108 Connected. (for Models Equipped ...
• P112 Disconnect The Foot Controller ...

Power

• P3 And Immediately Unplug The Power Cord. ...
• P4 Power Cord Or Garment Being Sewn May Ignite ...
• P6 Power Supply ...
• P10 The Plug On The Power Supply Cord Into The ...
• P15 ● Unplug The Power Cord If The Machine Is ...
• P16 Sewing Machine And Unplug The Power ...
• P24 ● Make Sure You Turn The Power Off While ...
• P30 ● Make Sure You Turn The Power Off While ...
• P38 If You Leave The Power On And Step On The ...
• P40 Refer To “power Supply” (page 14). ...
• P49 Turn Off The Main Power Before Replacing The ...
• P51 Turn Off The Main Power Before Replacing The ...
• P52 Turn Off The Main Power Before Replacing The ...
• P55 Turn Off The Main Power Before Replacing The ...
• P61 Turn Off The Main Power Before Replacing The ...
• P63 Turn Off The Main Power Before Replacing The ...
• P65 Turn Off The Main Power Before Replacing The ...
• P70 Turn Off The Main Power Before Replacing The ...
• P73 Turn Off The Main Power Before Replacing The ...
• P93 ● Unplug The Power Supply Cord Before ...
• P108 Is Turned Off. Turn On The Main Power Switch. ...
• P113 Main Power ...

Operate

• P3 4 Never Operate This Machine If It Has A ...
• P4 • Do Not Operate Where Aerosol (spray) ...
• P15 The Machine Does Not Operate Correctly Due To A ...
• P16 Correctly Operate The Machine. ...
• P21 ● If The Sewing Machine Is To Be Operated ...
• P23 ● If The Sewing Machine Is To Be Operated ...
• P24 Models Are Used ...
• P34 Being Operated. ...
• P104 Bar And Feed Dogs Operate Correctly. ...
• P112 Operate The Machine By Using The Foot ...

Troubleshooting

• P5 Is Required ...
• P7 Frequent Troubleshooting Topics ...
• P96 And Remedies For Common Troubleshooting Topics Are
• P114 Troubleshooting ...

Safety

• P3 Please Read These Safety Instructions Before ...
• P5 By A Person Responsible For Their Safety. ...
• P6 Important Safety Instructions ...

Specification

• P5 Of This Manual And Specifications Of This Product Are

Dimension

• P63 Of Clothing ...

Contact

• P3 Power Source You Have ...
• P5 Should Contact Your Authorized Dealer To Obtain ...
• P8 Contact Your Dealer. ...
• P16 If It Still Does Not Fit ...
• P62 Slider So It Will Not Contact The Presser Foot ...
• P93 Using The Machine ...
• P94 Case (part Code ...
• P96 Before Contacting Us. ...
• P101 Complete It Forcefully ...
• P102 Completing These Steps ...
• P103 Case (part Code ...
• P104 Therefore ...
• P108 Contact Your Retailer Or The Nearest ...
• P109 Contact ...
• P110 Contact Your Retailer Or The Nearest ...
• P112 Contact Your Nearest Authorized Service ...