Brother CS-8120, CS-8130, CS-8150 Operation Manual

PDF Info

Brand:

Brother

Category:

Sewing Machines

Model:

CS-8120, CS-8130, CS-8150

Type:

Operation Manual

Language:

English

File Information:

PDF / 5.1 Mb / 140 pages

Brother CS-8120,CS-8130,CS-8150 Operation Manual

Close

Cover of BrotherSewing Machines CS-8120,CS-8130,CS-8150 Operation Manual

Contents

• P9 Contents ...
• P119 The Contents Stored In The ...
• P120 Check The Contents ...

Install

• P3 Lever To Eject The Installed Thread Cassette. ...
• P4 The Presser Foot Is Installed Onto The Presser ...
• P6 On Threading The Upper Thread ...
• P9 Installing The Bobbin ...
• P14 Or Other Parts To Assure Correct Installation. ...
• P15 Winding/installing The Bobbin ...
• P17 Contact A Qualified Electrician To Install The ...
• P19 Installing The Bobbin ...
• P24 Winding/installing The Bobbin ...
• P25 Winding/installing The Bobbin ...
• P27 Winding/installing The Bobbin ...
• P28 Install The Bobbin Wound With Thread. ...
• P29 Winding/installing The Bobbin ...
• P30 Install The Small White Spool Cap With Some ...
• P34 This Section ...
• P37 The Extra Spool Pin Is Now Installed. ...
• P38 While The Thread Cassette Is Not Installed ...
• P39 Install The Twin Needle. ...
• P41 Refer To Steps 1 Through 5 Of “installing The ...
• P43 G A 75/11 Needle Is Already Installed When ...
• P45 Install The Twin Needle In The Same Way. ...
• P46 The Needle Is Installed. ...
• P48 Wrong Presser Foot Is Installed ...
• P49 Installed ...
• P52 Then ...
• P73 Wrong Presser Foot Is Installed ...
• P77 G If The Thread Cassette Is To Be Installed ...
• P111 • For Details On Installing A Needle ...
• P131 Installed ...
• P132 Correctly Install The Spool. ...
• P133 Installed. ...
• P134 And Correctly Install The Bobbin ...
• P136 Cassette Was Installed. ...

Connect

• P12 8. To Disconnect ...
• P13 Colored Brown Must Be Connected To The Terminal ...
• P16 Due To A Bad Connection Or A Disconnection ...
• P50 1 Connecting Fork ...
• P57 1 When Connecting The Foot Controller ...
• P76 1 Connecting Fork ...
• P100 Connect The Foot Controller. ...
• P132 Disconnect The Foot Controller. ...
• P136 Button Was Pressed Without Connecting The ...

Power

• P4 Plug On The Power Supply Cord Into The Power ...
• P9 Power Supply Precautions ...
• P14 • A Power Failure Occurs During Use ...
• P16 G Unplug The Power Cord If The Machine Is Not ...
• P17 Sewing Machine And Unplug The Power ...
• P130 G Unplug The Power Supply Cord Before ...
• P139 Main Power Switch ...

Operate

• P12 7. Do Not Operate Where Aerosol (spray) ...
• P16 The Machine Does Not Operate Correctly Due To A ...
• P17 Correctly Operate The Machine. ...
• P24 Machine Will Not Operate Correctly. Use Only ...
• P28 Not Operate Correctly. Use Only The ...
• P35 G The Needle Threader Is Operated When The ...
• P43 Being Operated. ...
• P132 Not Operate. ...

Troubleshooting

• P11 Troubleshooting ...
• P14 Is Required ...
• P123 Troubleshooting ...
• P132 Troubleshooting ...
• P133 Troubleshooting ...
• P135 Troubleshooting ...
• P137 Troubleshooting ...
• P140 Troubleshooting ...

Safety

• P8 The “important Safety Instructions” (page ...
• P9 Important Safety Instructions ...
• P12 This Machine ...

Dimension

• P92 Of Clothing ...

Contact

• P2 Contact Your Retailer. ...
• P7 Accessories Or Parts ...
• P17 Contact A Qualified Electrician To Install The ...
• P131 Shuttle (part Code ...
• P132 Contact Your Retailer Or The Nearest ...
• P133 Contact Your Retailer Or The Nearest ...
• P134 Contact Your Retailer Or The Nearest ...
• P135 Contact Your Retailer Or The Nearest ...