Brother CS-80, CS-8060 Operation Manual

PDF Info

Brand:

Brother

Category:

Sewing Machines

Model:

CS-80, CS-8060

Type:

Operation Manual

Language:

English

File Information:

PDF / 4.6 Mb / 115 pages

Brother CS-80,CS-8060 Operation Manual

Close

Cover of BrotherSewing Machines CS-80,CS-8060 Operation Manual

Contents

• P9 Contents ...

Install

• P3 Lever To Eject The Installed Thread Cassette. ...
• P4 The Presser Foot Is Installed Onto The Presser ...
• P9 Installing The Bobbin ...
• P14 Or Other Parts To Assure Correct Installation. ...
• P15 Winding/installing The Bobbin ...
• P17 Contact A Qualified Electrician To Install The ...
• P18 Winding/installing The Bobbin ...
• P19 Winding/installing The Bobbin ...
• P21 Winding/installing The Bobbin ...
• P22 Install The Bobbin Wound With Thread. ...
• P23 Winding/installing The Bobbin ...
• P24 Install The Small White Spool Cap With Some ...
• P28 This Section ...
• P31 The Extra Spool Pin Is Now Installed. ...
• P32 While The Thread Cassette Is Not Installed ...
• P33 Install The Twin Needle. ...
• P35 To Steps 1 Through 5 Of “ Installing The ...
• P37 G A 75/11 Needle Is Already Installed When ...
• P39 Install The Twin Needle In The Same Way. ...
• P40 The Needle Is Installed. ...
• P43 Installed ...
• P46 Then ...
• P69 G If The Thread Cassette Is To Be Installed ...
• P98 • For Details On Installing A Needle ...
• P107 Installed ...
• P108 Correctly Install The Spool. ...
• P109 Installed. ...
• P110 And Correctly Install The Bobbin ...
• P112 Cassette Was Installed. ...

Connect

• P12 8. To Disconnect ...
• P13 Colored Brown Must Be Connected To The Terminal ...
• P16 Due To A Bad Connection Or A Disconnection ...
• P44 1 Connecting Fork ...
• P51 1 When Connecting The Foot Controller ...
• P68 1 Connecting Fork ...
• P108 Disconnect The Foot Controller. ...
• P112 While The Foot Controller Was Connected. ...

Power

• P4 Plug On The Power Supply Cord Into The Power ...
• P9 Power Supply Precautions ...
• P14 • A Power Failure Occurs During Use ...
• P16 G Unplug The Power Cord If The Machine Is Not ...
• P17 Sewing Machine And Unplug The Power ...
• P106 G Unplug The Power Supply Cord Before ...
• P114 Main Power Switch ...

Operate

• P12 7. Do Not Operate Where Aerosol (spray) ...
• P16 The Machine Does Not Operate Correctly Due To A ...
• P17 Correctly Operate The Machine. ...
• P18 Machine Will Not Operate Correctly. Use Only ...
• P22 Not Operate Correctly. Use Only The ...
• P29 G The Needle Threader Is Operated When The ...
• P37 Being Operated. ...
• P108 Not Operate. ...

Troubleshooting

• P11 Troubleshooting ...
• P14 Is Required ...
• P101 Troubleshooting ...
• P108 Troubleshooting ...
• P109 Troubleshooting ...
• P111 Troubleshooting ...
• P115 Troubleshooting ...

Safety

• P8 The “important Safety Instructions” (page ...
• P9 Important Safety Instructions ...
• P12 This Machine ...

Dimension

• P83 Of Clothing ...

Contact

• P2 Contact Your Retailer. ...
• P7 Accessories Or Parts ...
• P17 Contact A Qualified Electrician To Install The ...
• P107 Shuttle (part Code ...
• P108 Contact Your Retailer Or The Nearest ...
• P109 Contact Your Retailer Or The Nearest ...
• P110 Contact Your Retailer Or The Nearest ...
• P111 Contact Your Retailer Or The Nearest ...