Alpine IDA-X200, IDA-X300 Owner Manual

PDF Info

Brand:

Alpine

Category:

Digital Media Receivers

Model:

IDA-X200, IDA-X300

Type:

Owner Manual

Language:

English

File Information:

PDF / 2.8 Mb / 42 pages

Alpine IDA-X200,IDA-X300 Owner Manual

Close

Cover of AlpineDigital Media Receivers IDA-X200,IDA-X300 Owner Manual

Contents

• P3 Contents ...
• P20 On The Contents. ...
• P28 Adjusted/set Contents Of The Selected Number Are ...

Setup

• P4 Range Speaker (tw Setup) ...
• P10 Press Func./setup So That The Indicator ...
• P11 Press Func./setup So That The Indicator ...
• P12 Func./setup ...
• P14 Press Func./setup. ...
• P15 Press Func./setup. ...
• P16 Press Func./setup. ...
• P17 Press Func./setup. ...
• P18 Press Func./setup. ...
• P23 Seconds To Activate The Setup Selection Mode. ...
• P24 Is Selected On The Setup Menu In Step 2. ...
• P25 Is Selected On The Setup Main Menu In Step 2. ...
• P26 Is Selected On The Setup Main Menu In Step 2. ...
• P27 Subw Channel ...
• P29 High Range Speaker (tw Setup)” (page 28). ...
• P30 Range Speaker (tw Setup) ...
• P33 High Range Speaker (tw Setup)” (page 28). ...
• P42 The Connected Head Unit (model Setup)” ...

Install

• P4 Installation ...
• P5 This Unit Will Not Be Installed In A Location ...
• P38 Installation Technician ...
• P39 * If The Installed Mounting Sleeve Is Loose In ...

Connect

• P(iDA-X200 only) ...
• PMP3/WMA/AAC ...
• Pwhen the DHA-S690 is connected. ...
• P3 Ida-x200 Is Connected Via Usb) ............... ...
• P4 Connections ...
• P5 Depending On The Connected Usb Memory Device ...
• P8 Is Connected. For Details ...
• P10 An External Audio Processor Is Connected. For ...
• P11 An External Audio Processor Is Connected. For ...
• P12 ...
• P13 Ida-x200 Is Connected Via Usb)” On Page 12. ...
• P14 Ida-x200 Is Connected Via Usb) ...
• P15 On ...
• P16 Only When A Cd Changer Is Connected. ...
• P17 Connected. ...
• P18 An Mp3 Changer Is Connected ...
• P19 An Mp3 Changer Is Connected ...
• P21 Audio Processor (pxa-h100) Is Not Connected. ...
• P22 Audio Processor (pxa-h100) Is Not Connected. ...
• P23 An External Audio Processor Is Connected. For ...
• P24 * For Ida-x200 ...
• P25 Off ...
• P26 Connected To The Speakers. In This Setting ...
• P27 Audio Processor Is Connected ...
• P28 Frequency Response Of The Connected Speakers. ...
• P30 Response Of The Connected Speakers. ...
• P31 Connected ...
• P33 Frequency Of The Connected Speakers. Determine ...
• P35 The Display After Reconnecting The Ipod To The ...
• P36 To The Portable Audio Player And Connect To ...
• P37 Player To The Connection Cable. ...
• P38 Terminal. Never Connect Left And Right Channel ...
• P39 Details Described In The Connections Section. ...
• P40 Disconnect The Cable Supplied With The Portable ...
• P41 Connections ...
• P42 Noise Suppressor ...

Power

• P3 Turning Power On And Off ...
• P4 (power Ic) ...
• P8 Turn Off The Unit Power. ...
• P23 Power Ic ...
• P24 (e.g. Select Power Ic On Or Power Ic Off.) ...
• P25 Occurs ...
• P26 By The System When The Power Output Is Set To ...
• P35 - Power Ic Is Switched To “on” (page 24). ...
• P37 Maximum Power Output ...
• P38 Into These Leads To Provide Power For This ...
• P41 Power Ant ...
• P42 • Keep The Battery Power Leads As Far Away ...

Operate

• P5 Do Not Operate Any Function That Takes Your ...
• P7 There Are 2 Ways To Operate The Double Action ...
• P8 You Can Operate This Unit From The Vehicle’s ...
• P10 • Operate The Unit While The Indicator ...
• P11 • Operate The Unit While The Indicator ...
• P12 • Operate The Unit While The Indicator ...
• P35 Instructions ...

Safety

• P38 Safety-related System) ...

Specification

• P4 Specifications ...
• P37 Product Improvement ...

Contact

• P8 For Details ...
• P38 So ...
• P42 Suppressors ...