AGFA Arcus II User Guide
Bookmarks and Contents
Bookmarks and Contents
PDF Info
AGFA Arcus II User Guide
- Brand:
- AGFA
- Category:
- Scanners
- Model:
- Arcus II
- Type:
- User Guide
- Language:
- English
- Document Format:
- PDF file
- Filesize:
- 688.7 Kb
- Total Pages:
- 50 pages
Contents
Unpack
Install
- P3 Installation For The Ibm Ps/2 ...
- P6 Not Occur In A Particular Installation. If This ...
- P7 Cables With Ferrite Core Installed On Scanner ...
- P15 Installation. You’ll Find Instructions For ...
- P21 Installation ...
- P22 Installation ...
- P23 Installation ...
- P24 Installation ...
- P25 Installation For The Macintosh ...
- P26 Installation ...
- P27 Installation For The Macintosh ...
- P28 Installation ...
- P29 Installation For The Pc ...
- P30 Installation ...
- P31 Installation For The Pc ...
- P32 Installation ...
- P33 Installation For The Ibm Ps/2 ...
- P34 Installation ...
- P44 Check The Installation Procedure ...
- P47 Ready To Resume The Installation Of The Scsi ...
- P50 ;this Profile Created Automatically By Install ...
Connect
- Pto the 50-pin SCSI ...
- P3 Testing The Connection ...
- P6 That To Which The Receiver Is Connected. ...
- P7 Connector End Must Be Used With This Equipment. ...
- P11 Disconnect The Power Plug When You Want To ...
- P19 Scsi Interface Connector ...
- P20 2. Connect The Power Cord To The Scanner. ...
- P23 Communication Standard Allows You To Connect ...
- P24 Scanner Is Turned Off And Is Disconnected From ...
- P25 Your Macintosh ...
- P26 3. Connect The Other Side Of The Scsi Cable To ...
- P27 4. Connect The Other Side Of The Scsi Cable To ...
- P28 That The Scsi Cable(s) Are Properly Connected. ...
- P29 Use And Instructions For Connecting The Scanner ...
- P30 4. Connect The 50-pin End Of This Scsi Cable To ...
- P31 4. Connect The Other Side Of The Scsi Cable To ...
- P32 That The Scsi Cable(s) Are Properly Connected. ...
- P33 Card To Use And Instructions For Connecting The ...
- P34 1. Connect The Power Cord To The Scanner. ...
- P43 (except The Startup Disk) And Connect Them ...
- P44 All Scsi Devices And Connect Them One By One ...
Power
- P5 Instructions For Power Supply Cord Selection ...
- P11 Disconnect The Power Plug When You Want To ...
- P17 Off The Scanner And Detach The Power Cord. ...
- P19 Power Switch ...
- P20 Stay On While The Scanner Is Powered Up. ...
- P23 Power Off. ...
- P28 1. Connect The Power Cord To The Scanner. ...
- P32 1. Connect The Power Cord To The Scanner. ...
- P34 1. Connect The Power Cord To The Scanner. ...
- P41 Turn Off The Power To The Scanner And Unplug ...
- P43 Off The Power To The Scanner And Unplug The ...
- P44 Verify The Power Connection To The Scanner ...
- P45 Power ...
Operate
- P6 When The Equipment Is Operated In A ...
- P7 Could Void The User’s Authority To Operate ...
- P11 Do Not Operate The Scanner When The ...
- P16 Loosened Before The Scanner Can Be Operated. ...
Troubleshooting
- P4 Troubleshooting ...
- P20 ‘troubleshooting’. ...
- P28 Problems ...
- P32 Problems ...
- P34 Problems ...
- P43 Troubleshooting ...
- P44 Troubleshooting ...
Safety
- P3 Important Safety Instructions ...
- P5 For The Reason Of Safety ...
- P11 For Your Own Safety And That Of Your ...
Specification
Warranty
Contact
- P15 If Something Is Missing ...
- P23 Off. Please Contact Your Dealer If You Need To ...
- P29 Such A Card ...
- P33 Contact Your Dealer. ...
- P43 Scanner Fuse Needs To Be Replaced. Contact Your ...
- P44 Or With The Scsi Board Of The Scanner ...